service air condition athina Explained in Instagram Photos

An air conditioning unit's filters, coils, and fins require regular upkeep for the unit to work efficiently and effectively throughout its years of service. Ignoring necessary upkeep makes sure a consistent decrease in a/c efficiency while energy usage steadily increases. Take a look at our Energy Saver 101 Infographic: House Cooling for more ways to assist enhance your comfort and the performance of your ac system.

Air Conditioning System Filters

The most important upkeep task that will ensure the effectiveness of your air conditioner is to routinely change or clean its filters. Obstructed, filthy filters block typical air flow and decrease a system's performance considerably. With regular air flow obstructed, air that bypasses the filter might bring dirt directly into the evaporator coil and hinder the coil's heat-absorbing capacity. Replacing a filthy, blocked filter with a tidy one can lower your a/c's energy consumption by 5% to service klimatistikon 15%.

For central air conditioning conditioners, filters are usually situated somewhere along the return duct's length. Common filter places remain in walls, ceilings, heating systems, or in the air conditioner SERVICE ΚΛΙΜΑΤΙΣΤΙΚΩΝ ΑΘΗΝΑ itself. Space air conditioning unit have a filter installed in the grill that deals with into the room.

Some kinds of filters are recyclable; others must be replaced. They are offered in a variety of types and performances. Clean or change your cooling system's filter or filters monthly or two throughout the cooling season. Filters might need more regular attention if the a/c remains in continuous use, is subjected to dusty conditions, or you have fur-bearing family pets in the house.

Air Conditioner Coils

The ac system's evaporator coil and condenser coil collect dirt over their months and years of service. A tidy filter avoids the evaporator coil from soiling quickly. In time, episkevi air condition nevertheless, the evaporator coil will still gather dirt. This dirt minimizes air flow and insulates the coil, minimizing its ability to soak up heat. To avoid this issue, check your evaporator coil every year and tidy it as required.

Outdoor condenser coils can also become very filthy if the outside environment is dusty or if there is foliage close by. You can quickly see the condenser coil and notice if dirt is gathering on its fins.

You need to reduce dirt and particles near the condenser system. Your dryer vents, falling leaves, and mower are all prospective sources of dirt and particles. Cleaning up the area around the coil, eliminating any particles, and trimming foliage back at least 2 feet SERVICE AIR CONDITION (0.6 meters) allow for sufficient airflow around the condenser.

Coil Fins

The aluminum fins on evaporator and condenser coils are quickly bent and can block air flow through the coil. Cooling wholesalers sell a tool called a "fin comb" that will comb these fins back into nearly initial condition.

Condensate Drains pipes

Periodically pass a stiff wire through the unit's drain channels. Blocked drain channels prevent an unit from decreasing humidity, and the resulting excess wetness might blemish walls or carpet.

Window Seals for Space Air Conditioners

At the start of each cooling season, examine the seal between the ac system and the window frame to guarantee it makes contact with the unit's metal case. Moisture can damage this seal, allowing cool air to leave from your home.

Getting ready for Winter season


In the winter season, either cover your room air conditioner or remove and keep it. Covering the outdoor system of a central air conditioning conditioner will protect the system from winter weather and particles.

Working with an Expert

When your a/c requires more than routine upkeep, employ an expert service specialist. A well-trained technician will find and repair problems in your cooling system.

The technician needs to:

Check for appropriate amount of refrigerant

Test for refrigerant leaks using a leakage detector

Record any refrigerant that must be evacuated from the system, instead of illegally releasing it to the atmosphere

Check for and seal duct leakage in central systems

Step air flow through the evaporator coil

Validate the appropriate electric control series and makeΕΠΙΣΚΕΥΗ AIR CONDITION certain that the heating system and cooling system can not operate simultaneously

Inspect electric terminals, clean and tighten connections, and use a non-conductive coating if needed

Oil motors and check belts for tightness and wear

Inspect the precision of the thermostat.